|
|
|||||
Welcome to the Master Details February Newsletter Free Stuff in February:
For the entire month of February any order of US$30.00 or more will include a 1/2 oz bottle of Insta-Cure+ Cyanoacrylate absolutely FREE a US$3.00 value! INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. Once you try BSI adhesives and epoxies we think you will agree that there is no better CA or modeling epoxy on the market at any price. |
Digg
this story!
|
||||
